Proper shingle pattern

When installing Architectural/ Three Dimensional shingles, there is a proper installation pattern. These shingles cannot be installed vertically. Our roofing experts are knowledgeable in every type of shingle. You can trust our experienced roofers to get the job done the right way, the first time.  Here is an example of how they are to be installed. Contact us for a free estimate!

Roof to Wall step Flashing

It is extremely important to install new step flashing where a roof line meets a vertical wall. We remove siding to get our new large step flashing up against the wall & under every shingle. When installing step flashing, it’s very important to lay the shingle, then put the new step flashing on top of the shingle, then nail it as high & away from the wall as possible. Repeat this all the way up the wall. When rain or ice hits the side of that wall, water will migrate slightly under the shingle & on to the metal step flashing, & that water can hit a nail if it’s nailed too low on the step. Nailing high will protect from this because the next shingle will be covering any nails. Contact us today for a free estimate.